Display Settings - ABUS Security-Center TVIP11560 Manual De Instrucciones

12.3.4.1 Display Settings

You can use this menu item to set the picture quality of the Speed Dome, including brightness, sharpness,
contrast and so on. Click on "Default" to restore the default values.
Please note:
The display setting parameters can vary depending on the model.
Brightness
Image brightness settings. A value between 0 and 100 can be set.
Contrast
Image contrast settings. A value between 0 and 100 can be set.
Saturation
Image saturation settings. A value between 0 and 100 can be set.
Hue
Setting for the hue. A value between 0 and 100 can be set.
Sharpness
Image sharpness settings. A higher sharpness value can increase image noise.
A value between 0 and 100 can be set.
Overexposure protection
When this function is activated, the IR light intensity is automatically reduced for objects that are too close.
This attempts to prevent object glare.
Exposure time
Setting the maximum exposure time. This setting is dependent on iris mode.
105
English