Maintenance; Service And Repairs - Metabo HPT UA3810AB Manual De Instrucciones

WARNING
: Risk of unsafe operation. Firmly
grasp
installing or disconnecting to prevent
hose whip.
WARNING
: Risk of bursting. When the tank
gets corroded, there is a risk of
breakdown.
in the air tank. If not drained, water
will corrode and weaken the air tank
causing a risk of air tank rupture.
Drain tank daily or after use. The
drain contains moisture in the air,
abrasion particles, rust, etc.. To drain
tank open valve slowly and tilt air
tank to empty accumulated water.
Keep face and eyes away from drain
cock.
CAUTION: Do not open the air cock if the air tank
and compressor
Use the drain cock when discharging the
compressed air from the tank.
Drain cock
Close
Open
Tank
Fig. 7

MAINTENANCE

1. Draining tank
Drain tank daily or after use. Open drain cock and tilt air
tank to empty accumulated water (Refer to Fig. 7).

SERVICE AND REPAIRS

All quality air tanks will eventually require servicing or
replacement of parts because of wear and tear from normal
use. To assure that only genuine replacement parts will
be used, all service and repairs must be performed by a
metabo HPT AUTHORIZED SERVICE CENTER, only.
NOTE: Specifi cations are subject to change without any
obligation on the part of the metabo HPT.
air hose in hand when
Water will condense
are not connected.
— 9 —
English