KENMORE ELITE 790.4920 Serie Manual Del Usuario página 8

GeneraJ CJeaning
Cleaning Various Parts of Your Appliance
BeforecHeaninganypartofthewarmerdrawer, be sure aHH c ontroHsare turned OFFand thewarmerdrawer is COOL, REMOVE
SPHLLOVERS AND HEAVY SOHLHNGAS SOON AS POSSHBLE, REGULAR CLEANHNGS NOW WHLL REDUCE THE
EXTENT AND DHFFHCULTYOF MAJOR CLEANHNG LATER,
Surfaces How to Ctean
GJass You may use a gHasscHeaner on the outside gHassof the drawer, DO NOT immerse
Drawer Front PaneH the drawer in water, DO NOT spray or allow water or the gJass cJeaner to enter
behind the drawer glass pane!, DO NOT use oven cHeaners, cHeaning powders or
any harsh abrasive cHeaning materiaHs on the outside of the drawer,
PJastic
ControHKnobs
Stainless Steel
Porcelain Enamel
Body Parts and Drawer Cavity
Warmer Drawer Rack
/
/
_j.J"
To remove controHknob, turn to the OFF position; grasp firmHy and puHH straight off
the shaft, CHeanwith a cHothsoaked in soapy water, Rinse with a dean water and a
dishcHoth, To repHace knob after cHeaning, Hineup the fiat sides of both the knob and
the shaft; then push the knob into pHace,
Note: Humidity controHHer knob cannot be removed,
CHean stainless steeJ with hot, soapy water and a dishcHoth, Rinse with dean water
and a cHoth, Do not use cteaners with high concentrations of chlorides or
cHorines. Do not use harsh scrubbing cHeaners, OnHyuse kitchen cHeaners that are
especiaHHymade for cHeaning stainHess steel AHways be sure to rinse the cHeaners
from the surface as bHuish stains may occur during heating that cannot be removed,
Gentile scouring with a soapy scouring pad wiHH remove most spots, Rinse with a 1:1
soHution of dear water and ammonia, ff necessary, cover difficuHt spots with an
ammonia-soaked paper toweHfor 30 to 40 minutes, Rinse with dean water and a
damp cHoth,and then scrub with a soap°fiHHed scouring pad, Rinse and wipe dry with
a dean cHoth, Remove aHH c Heaners or the porceHain may become damaged during
future heating, DO NOT use spray oven cHeaners,
The rack may be removed for cHeaning, Hfremoved, dean by using a miHd,abrasive
cHeaner foHHowing manufacturer's instructions, Rinse with dean water and dr},,