First Use; Checking The Laminator And Product Contents; Setting Up The Laminator - Pembrook OL 350-L-17 Manual Del Usuario

First use

− The laminator has vents. Never cover them with other
objects such as magazines, blankets or similar.
− Never attempt to clean the laminator by immersing
it in water and do not use a steam cleaner to clean it.
Otherwise, you could damage the laminator.
SAVE THESE INSTRUCTIONS
Keep the user manual for future reference.
First use

Checking the laminator and product contents

NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointy object, you may quickly damage the
laminator.
− Be very careful when opening the packaging.
1. Take the laminator out of the packaging.
2. Check whether the laminator or the individual parts exhibit damage. If
this is the case, do not use the laminator. Contact the manufacturer at the
service address specified on the warranty card.
3. Check to make sure that the delivery is complete (see fig. A).

Setting up the laminator

1. Position the laminator so that there is enough space to insert a laminating
pouch 6 . Do not position the laminator directly in front of a wall or other
objects.
2. Connect the power plug to a properly installed socket with a protective
conductor (AC 120 V, 60 Hz = house connection).
12