Triton Blue 7R Beam Pro Manual De Usuario página 23

s
et light run Parameter
Enter the page as shown in Figure 10, set the parameter of light:
» Pan Invert: Reverse PAN move.
» Tilt Invert: Reverse TILT move.
» Rectify Enable: Set as "OFF", PAN or TILT will disable position rectify function. As "ON", when PAN
or TILT will disable position rectify function. As "ON", when PAN or TILT lose steps, light will rectify auto
» Pan Offset: Set PAN original position.
» Tilt Offset: Set TILT original position.
» Lamp up when: Select lamp on mode, includes 3 mode: power on, after reset done and manual.
» Factory settings: Restore all parameter to factory setting.
V
ieW status
Enter the page as shown in Figure 12:
» View light current status, version.
» DMXClr: Click to clear all DMX data to "0"
» SysRst: Click to reset light.
User Manual | 7R BEAM PRO Triton Blue | Rev. May.2015 | www.triton-blue.com
23.