TIGEX Harmony 500 Instrucciones De Uso página 26

To use with the adapter, insert the output jack from the mains adapter
into the DC socket on the charging base, place the parents unit on the
charging base. Plug the adapter into a standard wall socket.
2- Switching on and connection between the 2 units
Baby unit
Press the button
The LED indicator will become green and then flash every 0.5 seconds
during connection. The indicator light stops flashing once the connec-
tion is established.
Parents unit
Turn the wheel
The LED indicator will become green and then flash every 0.5 seconds
during connection. The indicator light stops flashing once the connec-
tion is established.
3- Adjusting the volume
Parents unit
Turn the wheel
decrease the volume.
4- Baby unit functionalities
for two seconds to switch on the appliance.
OFF - ON +
OFF - ON +
up on the parents unit.
up to increase the volume and down to
25