Midland M-5 Manual Del Usuario página 17

12. SCAN: scan button. Shortly press to activate the scan function. While scan-
ning you can change the direction by pushing UP or DOWN.
13. A/F: to select the AM or FM mode. If you select UK or CE bands (operating
in FM mode only) by pressing this button you enable the LCR function (Last
Channel Recall)
14. SQ: short press to select the squelch levels, while if you keep this button pres-
sed you can change the type of squelch (manual or digital)
15. PTT: press to transmit
16. SQ- / VOL: push to reduce the volume and the squelch level. The squelch can
be adjusted by pressing SQ and then UP/DOWN.
17. MUTE/PWR: push twice to enable/disable the speaker (MUTE function); if
you keep it pressed you turn on/off the transceiver.
18. SQ+/VOL: push to increase the volume and the squelch level. To adjust the
squelch, see point 16 (SQ-/VOL).
Display
a
a. Selected channel number
b. S-METER. Received signal strength indicator and transmission power signal
c. AM/FM mode
d. RX/TX indicator: reception (RX) and transmission (TX)
e. SC: SCAN function activated
f. ASQ: automatic squelch activated
g. LOW: low power indicator
h. EMG: emergency channel 9/19 indicator
i. LOCK: keypad lock activated
j. Operating band / MUTE / MENU indicator
M-5 Instruction Guide
c d
88 RX TX EMG SC LOW
FM AM
8
3
1
j
RFG
EMG
F
h e g
LOCK
ASQ
SIG
+30
9
5
b
SCAN
A/F
SQ
i
f
| 5