Features; Assembly - Craftsman 315.CH2000 Manual Del Operador

PRODUCT SPECIFICATIONS
Battery Pack Voltage ............................................................................................................................................... 19.2 V DC
Charger Input......................................................................................................................................... 120 V, AC only, 60 Hz
Charge Time ...........................................................................................1 hour per port (Li-ion) / 45 minutes per port (NiCd)
KNOW YOUR CHARGER
See Figure 1, page i.
The safe use of this product requires an understanding
of the information on the product and in this operator's
manual. Before use of this product, familiarize yourself
with all operating features and safety rules.
BATTERY PROTECTION FEATURES
Craftsman 19.2 V lithium-ion batteries are designed with
features that protect the lithium-ion cells and maximize
battery life.
C3 STATUS INDICATOR BUTTON
The C3 status indicator button wakes the charger from
sleep mode and indicates charger status.
CORD TRACK
Inserting the cord into the cord track keeps the power
cord flat against the charger for hanging on the wall mount
or sitting on a flat surface.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing
list are included.
WARNING:
Do not use this product if it is not
completely assembled or if any parts appear to be
missing or damaged. Use of a product that is not
properly and completely assembled could result in
serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
 If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
Charger
Wall Mount Bracket
Operator's Manual

FEATURES

DIAGNOSTIC FEEDBACK
LEDs provide feedback to indicate whether the battery
pack is charging, fully charged, or defective.
DUAL CHEMISTRY
The battery charger can charge either lithium-ion or
nickel-cadmium batteries.
KEY HOLE HANGER
The charger has a key hole hanging feature for convenient,
space saving storage. Screws should be installed so that
the center distance is 8-1/2 in.
WALL MOUNT BRACKET
The charger comes with a space-saving wall mount bracket
for quick and easy storage. Screws should be installed so
that the center distance is 10-1/4 in.

ASSEMBLY

WARNING:
do not operate this product until the parts are
replaced. Use of this product with damaged or
missing parts could result in serious personal injury.
WARNING:
or create accessories not recommended for use with
this product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
ASSEMBLING WALL MOUNT BRACKET
See Figures 2 - 3, page i
 Find desired location indoors and away from any
objects that could block vents on charger. Locate a
wall stud to securely mount bracket.
 You will need two #8 - 2 1/2 in. screws (not included)
 Use a level to be sure that bracket is in a vertical
position. Use a pencil to mark screw hole placement.
Screws should be installed so that the center distance
is 10-1/4 in.
 Install screws to securely attach bracket.
 Place bottom end of charger into bracket then snap top
of charger securely into bracket.
 Charger should fit snugly and securely in bracket.
5 - English
If any parts are damaged or missing
Do not attempt to modify this product