TECshow NAVIGATOR WI DMX Manual De Usuario página 6

6. SET UP
• Open the shipping carton and carefully remove
the unit from the shipping carton.
• Before plugging your unit in, be sure the source
voltage in your area matched the required volt-
age fro your fixture before attempting operation.
• Do not switch the unit on and off in short time
intervals.
• Always unplug the unit when it is not used for a
long time or start servicing.
• In the event of serious operating problems,
stop using the fixture and contact your dealer
immediately.
XLR Male Socket
1. Ground
3. Hot
Functions of the dip switch
P. 6
Tecshow Navigator WI DMX | English version
XLR Female Socket
2. Cold 2. Cold
XLR Pin Configuration
Pin 1: Ground
1. Ground
Pin 2: Date Compliment (negative)
Pin 3: Date ture (positive)
3. Hot