Slide Setup; Network Setup - RCA BRC11082 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TV Display
Depending on the format of the Blu-ray Disc or DVD, you can choose the picture format (aspect ratio) best
suited to the format of your TV screen:
4:3
• When wide-screen video is played, this mode clips the right and left sides of the image so that it can be
viewed on a conventional screen.
• Some wide-screen discs that do not permit Pan Scan mode playback are automatically played in letterbox
mode.
• When wide-screen video is played in this mode on a conventional Analog TV, black bands appear at the top
and bottom of the screen.
16:9
• This is the correct mode for playing wide-screen videos on on a wide-screen TV (most modern Digital TV's)
Note:
• The displayable picture size is determined by the DVD disc. Therefore the playback picture of some discs may
not conform to the picture size you select.
• When you play discs recorded in the 4:3 aspect ratio, the playback picture will always appear in the 4:3
aspect ratio regardless of the TV TYPE setting.
View Mode
Fill, Original and Pillarbox are available for your choice.
Note: Depending on the disc, you may not be able to view the mode as selected.
HDMI Resolution
To select the HDMI resolution to match the capabilities of your TV.
Note: HDMI resolution can be only selected if the HDMI cable is connected to a TV.

Slide Setup

This menu allows you to control photo viewing options.
1. In STOP mode, press the SETUP button. Press the
2. Use the
button to move the highlight bar to the right, press the
or
button to select Transition mode and Slide Internal Time,
press the OK button to select.
3. Use the
or
button to select your settings, then press the OK
button to confirm.
4. Press the
button to go back to the previous menu. Repeat steps
2 and 3 to adjust other options.
5. To exit the SETUP MENU and return to the normal screen, press
the EXIT or SETUP button.
Transition Mode
None, Slide, Stripes, Fade, Wipe and Random are available for your
choice.
Slide Internal Time
5 seconds, 10 seconds, 30 seconds and 1 minute are available for your choice.

Network Setup

1. In STOP mode, press the SETUP button. Press the
select Network.
2. Use the
button to move the highlight bar to the right, press the
or
button to select Wired and Netflix, press the OK button to
select.
3. Use the
or
button to select your settings, then press the OK
button to confirm.
4. Press the
button to go back to the previous menu. Repeat steps
2 and 3 to adjust other options.
5. To exit the SETUP MENU and return to the normal screen, press
the EXIT or SETUP button.
BRC11082_ENG IB_20100902.indd 17
button to select Slide.
Setup\
button to
Setup\
Slide
Transition mode
>
None
Slide Interval Time
>
5 seconds
Network
Wired
>
Auto Configuaration
Netflix
>
MAC Address
8C:84:01:00:B8:09
Auto>
IP Address
192.168.5.156
Subnet Mask
255.255.255. 0
Default Gateway
192.168.5.5
17
9/3/2010 10:27:08
EN

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido