Mounting - Workzone 46706 Manual Del Usuario

Motion Sensing LED Spotlight
MOUNTING INSTRUCTIONS:
1. Determine location for mounting Motion Sensing
LED Spotlight. NOTE: For best performance,
Motion Sensing LED Spotlight should be
positioned so motion sensor is on top and
light is on bottom. Unscrew the mounting
base as shown
2. Once the mounting base is separated,
flip it and use it as a template. Mark
the positions of the screws on the wall
using a pencil.
3. Drill two holes on the marks and plug
in the provided anchors. Then screw
in the provided screws keeping a little
distance between the screw head and
the wall so the mounting base can slide
in place.
4. The Spot Light can rotate 360°
from the base and tilt back and
forth by loosening the adjustment
knob on the neck. Once the desired
position is set, tighten the knob.
AFTER SALES SUPPORT
1 866 558 8096
Mounting instructions
service@801service.net
6