Cleaning And Maintenance - HQ-Power HQLE10019 Manual Del Usuario

 Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
 Do not switch the device on immediately after it has been exposed to
changes in temperature. Protect the device against damage by leaving
it switched off until it has reached room temperature.
 Use the appropriate power supply (see Technical Specifications below).
 Lighting effects are not designed for permanent operation: regular
operation breaks will prolong their lives.
 Keep this manual for future reference.
4. Operation
 Install the device on a stable and non-slip surface.
 Make sure the power switch is set to OFF.
 Connect the device to the mains using the included adapter. Only use
the included adapter or one with the same specifications.
 Set the power switch to ON or SOUND. The device starts operating.
 You can control the lightning inside the ball by touching it carefully.
 Set the power switch to OFF to stop the device. Disconnect from the
mains after use.


5. Cleaning and Maintenance

 Mechanically moving parts must not show any signs of wear and tear.
 The electric power supply cables must not show any damage. Have a
qualified technician maintain the device.
 Disconnect the device from the mains prior to maintenance activities.
Let the device cool down.
 Wipe the device regularly with a moist, lint-free cloth. Do not use
alcohol or solvents.
 Do not immerse the device in any liquid.
 There are no user-serviceable parts.
 Contact your dealer for spare parts if necessary.
V. 03 – 06/11/2018
HQLE10019
To avoid component damage, do not use the enhanced
mode (hands on the bulb) during longer periods.
4 ©Velleman nv