Descargar Imprimir esta página

i-tec iFP Manual De Instrucciones página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

iFP
Unlock Introduction
1. Press the Fingerprint on the Fingerprint Reader and wait a moment. --> Verify Fingerprint successfully,
Buzzer: 'Beep'
2. Press down handle to open the door
3. If verify Fingerprint failed, move your Fingerprint out of the Reader, wait for a moment, then press again
Unlock By Password
1. Touch your hand on the screen.--> Buzzer: Music Keypad backlight on
2. Input Master User Password or Normal User Password. --> Buzzer sounds 'Beep' when you touch every
keypad
3. Press '#' to confirm. --> Buzzer: 'Beep'
Please pay attention to protecting your password when you are operating.
Unlock By Scrambled Password
1. Touch your hand on the screen. --> Buzzer: Music Keypad backlight on
2 Input Scrambled Password 1. --> Buzzer sounds 'Beep' when you touch every keypad
3 Input Master User Password or Normal User Password. --> Buzzer sounds 'Beep' when you touch every
4 Input Scrambled Password 2. --> Buzzer sounds 'Beep' when you touch every
5 Press '#' to confirm. --> Buzzer: 'Beep'
Input 'scrambled password 1' and 'user registered password' , which should be less than 25 digits then press
'#' to unlock the door.
System Parameter Setting
9- Turn On Scrambled Password Function
Operation:Touch your hand on the screen+#11#+Input Master User Password + '#' or press Master User
Fingerprint
10- Turn Off Scrambled Password Function
Operation:Touch your hand on the screen+#21#+Input Master User Password + '#' or press Master User
Fingerprint
11- Turn On Serial Port Communication Function
Operation:Touch your hand on the screen+#12#+Input Master User Password + '#' or press Master User
Fingerprint
12- Turn Off Serial Port Communication Function
Operation:Touch your hand on the screen+#22#+Input Master User Password + '#' or press Master User
Fingerprint
13- Turn On Switch Signal Unlock Function
Operation:Touch your hand on the screen+#13#+Input Master User Password + '#' or press Master User
Fingerprint
14- Turn Off Switch Signal Unlock Function
Operation: Touch your hand on the screen+#23#+Input Master User Password + '#' or press Master User
Fingerprint
Setting up the time : press 31#
5
www.itec.com.pt

Publicidad

loading