User Manual; General Guidelines - Toolland WELD Serie Manual Del Usuario

Soplete de soldadura
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that
disposal of the device after its lifecycle could harm the
environment. Do not dispose of the unit (or batteries) as
unsorted municipal waste; it should be taken to a
specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect
the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Toolland! Please read the manual thoroughly
before bringing this device into service. If the device was damaged in
transit, do not install or use it and contact your dealer.
This is a high-quality product tested individually and guaranteed in
order to provide safe and excellent performance. Note that the
connection to the gas cylinder must be made with a rubber hose
approved by the laws of the country of use.
2.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last
pages of this manual.
3.
Before Use
Make sure the rubber hose is in good condition, the connection of the
rubber hose to the cylinder with hose clamps is tight and that the
rubber can withstand the pressure.
V. 01 – 29/11/2016
WELD-xxx/105/110C

USER MANUAL

2
©Velleman nv

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Weld-105Weld-108Weld-110c

Tabla de contenido