System Requirements; Technical Specifications - Sveon SNT1016 Manual De Usuario

1. Welcome
Thanks for choosing SNT1016, a WiFi USB N/150Mbps adapter from Sveon to connect your laptop or computer through
a network in a wireless mode. This adapter includes a RP-SMA female antenna which you can move or replace to get a
better coverage.
Through this user guide we will show you how to connect and use the device to get the best performance.
2. Features
The Wireless-N technology* offers a high speed and maximum coverage in Wireless N networks but also allows you to
connect your devices through a wireless network G or B. In addition, thanks to this adapter with RP-SMA antenna and its
chipset Ralink 5370, you can get a higher speed and coverage than other "N" devices.
Connect your PC or laptop in a very fast and easy way, thanks to Ralink advanced software and thanks to WPA2 security.
The device supports the data encryptation WEP/64/128, WPA, WPA2 and WPS.
SNT1016 device includes WPS (WiFi Protected Setup) system. This system makes easier the connection between
devices through the network (with WPA/WPA2 data encryptation).
* The performance of Wireless N Tecnology depends on the usage environment.

3. System requirements

- PC or laptop with an available USB 2.0 port*
- OS: XP with Service Pack 2, 2000, Vista, W7
- CD/DVD ROM unit
- Processor 300MHZ with 64mb of RAM.
- Wireless Modem/Router 802.11b/g o 802.11n
* If you use an USB 1.1 connection the speed and signal level may be reduced.
4. Technical Specifications
- Standard: IEEE 802.11n, 802.11b, 802.11g
- Modulation: OFDM/CCK/16-QAM/64-QAM
- Interface: USB 2.0 (compatible USB 1.1)
- Frequency: 2.4-2.4835Ghz
- Transmission distance: Indoor: 100m / Outdoor máx: 300m
- Transmission power: 11n: 15dbm / 11g: 15dbm / 11b: 18dbm
- Data rate:
11n: 27, 54, 108, 150Mbps
11g: 6, 9, 12, 24, 36, 48, 54 Mbps
11b: 1,2,5.5, 11Mbps
- Data security: 64/128 bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES)
- Receiver sensitivity:
68 dbm 10% (135m, 108m, 54m)
85 dbm 10% (11m)
88 dbm 10% (6m)
90 dbm 10% (1m)
- Chipset: Ralink 5370
- Operation system: Windows XP32/64, Vista 32/64, Win 7 32/64
- Usage enviroment:
· Working temperature: 0ºC~40ºC
· Storage temperature: -40ºC ~ 70ºC
· Relative Humidity: 10% ~ 90% (non condensing)
· Storage humidity: 5% ~ 95% (non condensing)
5. Content
- SNT1016 adaptor with RP-SMA connector (female connector / Male pin).
- 2dBi omnidirectional antenna with RP-SMA connector
- USB stand with extensor cable (1.5m of lenght)
- CD Driver
- Digital user guide (included in CD Driver)
- Warranty card
- Quick Installation Guide
6. Hardware
1. USB Stand
2. SNT1016 adaptor
3. RP-SMA antenna
4. USB port
5. Status indicator LED
6. WPS button
7. RP-SMA antenna connector
SNT1016 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
8. Device connection
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI
utility
9.3 Add the network connection to a
profile
9.4 Network connection with WPS
10.MAC address specifications
Important Information
English 12