Responding To Questions; Changing Settings; Ntering Text - Numark DDS 80 Manual De Referencia

Responding to Questions

When DDS needs to send you a messsage or ask
you a question it will do so with a Dialog.
response is required the options will appear in the
Menu Bar. Select the desired option to answer the
question and the Dialog will close, returning you to
whatever you were doing.
In this example, DDS is responding to the DJ's
command to clear all tracks from the Crate by
checking if he is really sure.

Changing Settings

A Dialog can be used to change settings, in which
case each setting is shown with the active setting
highlighted. Its value can be changed simply by
rotating the Push Select knob - some settings have
a textual description for each value, others have a
sliding bar. To change a different setting, press the
Push Select knob. Keep pressing to cycle through
all the settings in turn. Settings usually take effect
immediately.
In this example the DJ is changing the mode settings for Deck A.
Entering Text
A text entry box is used whenever you need to get some text into DDS, for example while searching for
a track or naming a playlist. Unlike other kinds of settings the text entry box has its own menu which
works along with the Push Select knob to make it easy to enter text with or without a keyboard. A
highlighted box on the right shows the character which you are about to enter and the menu can be
used to delete the previous character (Delete), insert a space (Space), switch between lower and upper
case (Caps), and finsh entering text (Done).
If you have a USB keyboard connected to your DDS you can simply type text straight into a text entry
box. This is the fastest way to enter text. Use the left and right cursor keys to move around within the
text you have entered. The Enter and Tab keys complete text entry the same as the Done menu
option.
If you do not have a keyboard connected you can enter characters using the Push Select knob. Rotate
left or right to move through each letter, numeral and symbol. To fix the desired character press the
Push Select knob. When you're finished, select Done.
If a
13