Clarke American Sanders EZ-8 Manual Del Operador página 4

Ocultar thumbs Ver también para American Sanders EZ-8:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
EN
DANGER:
Operating partially assembled sanding equipment could result in injury to the operator or
bystander and could cause damage to the equipment or to other property.
Do not operate this equipment unless it it fully assembled and all guards, doors and covers
are secured.
Keep all fasteners tight.
Keep all adjustments within manufacturers specifications.
DANGER:
Moving parts on this sanding equipment can cause injury to the operator or bystanders.
Keep hands, feet and loose clothing away from all moving parts.
Do not change or adjust the abrasive while the sanding equipment is running.
Do not service the sanding equipment while it is running.
DANGER:
This sanding equipment requires a supply of electricity. Improper use could result in electrical
shock or fire.
Connect only to an electrical source matching what is shown on the equipment nameplate.
Do not use this sanding equipment on an ungrounded electrical circuit. Consult an electrician
if you suspect the circuit is not properly grounded.
Do not use this sanding equipment with a damaged electrical cord. Inspect before each use.
Avoid striking the elelctrical cord with the abrasive. Always lift the electrical cord over the
sanding equipment.
Do not use the electrical cord to move the sanding equipment.
Disconnect the electrical source before servicing this equipment.
WARNING:
In the event of a bag fire, injury can occur to the operator if the operator is tied or strapped to equipment.
Use operating belt properly.
WARNING:
Injury to the operator or bystander can occur if protective gear is not worn while sanding. Always
use eye, ear, and respiratory protection while performing any sanding operation.
WARNING:
This sander is not to be used on pressure treated wood. Some pressure treated woods contain
arsenic and sanding pressure treated wood produces hazardous dust. Inhaling hazardous dust
from pressure treated wood can cause serious injury or death. Sanding pressure treated wood
decks or uneven surfaces can damage the sander which is not covered under warranty or damage
waiver.
WARNING:
Bodily injury could occur if power is applied to the equipment with the power switch already in the
"ON" position. Always check to assure that the power switch is in the "OFF" position before
connecting power supply.
CAUTION:
Maintenance and repairs performed by unauthorized personnel could result in damage or injury.
Maintenance and repairs performed by unauthorized personnel will void your warranty. Servicing
of this unit must always be referred to an authorized Clarke American Sanders distributor.
CAUTION:
Use of this equipment to move other objects or to climb on could result in injury or damage. Do not
use this equipment as a step or furniture. Do not ride on this equipment.
CAUTION:
Damage could occur to the equipment if not properly kept in a dry building for storage.
equipment in a dry building.
CAUTION:
The equipment is heavy. When transporting the equipment, remove the motor. Get help to lift the
equipment and motor.
CAUTION:
Serious damage to the floor can occur if the sanding equipment is left running in one spot while
the sanding drum is in contact with the floor. To avoid damage to the floor, feather cut in at a normal
sanding rate. Do not dwell while lowering or raising the contact wheel. Always sand at a constant
rate.
-4-
®
Clarke
American Sanders
Store the
Operator's Manual (EN) - EZ-8 Sander

Publicidad

Tabla de contenido
loading

Tabla de contenido