Power, Display And Number Buttons - Vieta Home VH-MS440SL Manual De Usuario

Power, Display and Number buttons
POWER ON/OFF, Standby
1. Press each power switch on both the receiver and
the CD player to turn the power on or off;
2. POWER(Standby): Puts both CD Player and Receiver
into standby, and press again to power on.
Note: Please turn off the CD player in the frontpanel
to save power waste, when you are using the receiver
only.
Explanation of the VFD display
The system features a descriptive VFD display that
displays all the information required. Below you can see
the display and explanations of the various symbols.
Track time
Track number
Tuned frequency
FM mode
Explanation of Number buttons
For CD track selection:
1. For single-digit track numbers, press1~9;
2. For two-digit track numbers, first press the
+10 button, then press the end number button.
e.g.15, press +10 then 5 to select track 15, if 35, press
the +10 button 3 times, then press 5.
For Tuner preset:
1. Once a station is tuned, you can press the desired
number for 3 seconds, then the station is stored;
2. For single-digit preset numbers, press the number
button for 3 seconds; For two-digit preset numbers,
first press +10 button (as CD track selecting), then
press the end number button for 3 seconds.
33