Descargar Imprimir esta página

Speedlink Medusa 5.1 Surround Home Instrucciones De Manejo página 17

Ocultar thumbs Ver también para Medusa 5.1 Surround Home:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Operation
Changing audio source
When the amp box is switched on, the "INPUT" and "OUTPUT" LEDs will light up blue. To switch
from "INPUT 1" to the audio source on "INPUT II" simply press the input button on the front side
of the amp box. The relevant LED will now light up red and "INPUT II" will now be selected as the
audio source.
Changing audio output
To switch the audio output from the headset to an external 5.1 surround sound system connected
to the bypass output, simply press the output button on the front side of the amp box. The relevant
LED will now light up red. If you want to return audio output back to the headset, simply press the
output button again.
Connecting an external microphone
Bypassing the headset microphone
You can connect an external microphone to the "MIC" socket on the front side of the amp box. This
automatically deactivates the microphone on the Medusa Headset.
External microphone for bypass audio output
You can connect an additional external microphone to the rear side of the amp box. This mic-
rophone is connected to the bypass audio output and only works if you have selected "Bypass
Output" as the audio output (red LED lit up) on the front side of the amp box.
Adjusting the volume
You can adjust the output volume using the dial on the front side of the amp box.
You should fi ne tune the microphone volume and audio playback using the Windows audio cont-
rols. Click on the speaker symbol located on the bottom right of your screen in the quick start list
and adjust the volume to a level that best suits you.
Troubleshooting
The headset doesn't work
Check if the cables have been correctly connected to the headset and the amp box.
Refer to your soundcard's manual for details on how to connect the headset correctly.
The headset does not reproduce surround sound
Check if the DVD program you use on your PC supports surround sound and change the
sound settings in the program.
Check the sound settings in your game to see if surround sound is supported and change the
sound settings in the game accordingly.
Change the audio playback setting to "Dolby Surround 5.1" in the audio setup on your DVD
player.
17
GB

Publicidad

loading

Este manual también es adecuado para:

Sl-8796