Technical Data Sheet - Tannoy DVS (EN54) Serie Manual De Instrucciones

7.1. DVS 4 (EN54) Technical Specifications

Technical Data Sheet

7.1. DVS 4 (EN54) Technical Specifications
Specifi cations
Performance
System
Frequency response (-3 dB)
Frequency range (-10 dB)
Rated sensitivity (1 W, Lo Z)
Sensitivity as per EN54
(4 m, through transformer)
Directivity factor (Q)
Directivity Index (DI)
Power Handling
(3)
Average
Programme
Peak
Recommended Amplifi er Power
Nominal Impedance (Lo, Z)
Maximum SPL as per EN54
Rated maximum SPL (1 m, Lo Z)
Average
Peak
Transformer Taps (via front rotary switch)
70 V
100 V
Crossover Point
Coverage angles (4)
500 Hz
1 kHz
2 kHz
4 kHz
Distortion
10% full power
1% full power
Transducers
Low Frequency
High Frequency
Physical
Enclosure
Grille
Connectors
Transformer setting
Dimensions (H x W x D)
Net Weight (ea)
Shipped weight
Included Accessories
Packed Quantity
10
DVS (EN54) Operation Manual rev 1.1.1
DVS 4 (EN54)
75 Hz - 20 kHz
(1)
60 Hz - 30 kHz
(1)
(2) 84 dB
70 dB
(2)
6.5 averaged 1 kHz to 10 kHz
5.3 averaged 1 kHz to 10 kHz
40 W
80 W
160 W
80 W @ 6 ohms
6 ohms
84.8 dB
(4 m, through transformer)
(2)
(2)
100 dB
106 dB
30 W (165 Ω) / 15 W (330 Ω) / 7.5 W (660 Ω) / 3.75 W (1320 Ω) /
OFF & low impedance operation
30 W (330 Ω) / 15 W (660 Ω) / 7.5 W (1320 Ω) /
OFF & low impedance operation
3.9 kHz - 2nd order LF, 2nd order HF
Horizontal plane
250 Hz
1 kHz
10 kHz
250 Hz
1 kHz
10 kHz
100 mm (4.00") mineral loaded cone material
19 mm (0.75") coaxially mounted
ABS
Aluminium, Painted
Removable locking connector with screw terminals with "loop through" facility
Rotary switch
277.0 x 170.4 x 165.6 mm
(10.91" x 6.71" x 6.52")
1.8 kg (3.96 lbs)
5.4 kg (11.9 lbs)
Yoke bracket
2
Vertical plane
360° 360°
151° 124°
113° 129
142° 146
Harmonics
2nd 3rd
0.738% 0.772%
0.145% 0.234%
0.070% 0.070%
0.320% 0.311%
0.078% 0.174%
0.087% 0.087%
DVS 4 (EN54)
Ordering Information
Part Number
8001 7590
8001 7591
Notes:
1. Average over stated bandwidth. Measured in
an IEC baffl e in an Anechoic Chamber
2. Unweighted pink noise input, measured at
1 metre on axis
3. Long term power handling capacity as defi ned
in EIA - 426B test
4. The reference point for the reference axis
(on-axis) is the centre of the baffl e. The
horizontal and vertical planes are defi ned with
the speaker mounted with the transformer
tapping selector at the bottom
A full range of measurements, performance data,
CLF and Ease™ Data for DVS 4 can be downloaded
from www.tannoy.com. They also apply to the
DVS 4 (EN54).
Tannoy operates a policy of continuous research
and development. The introduction of new materials
°
or manufacturing methods will always equal or
°
exceed the publishing specifi cations, which Tannoy
reserves the right to alter without prior notice. Please
verify the latest specifi cations when dealing with
critical applications.
Copyright (c) 2013 Tannoy Limited. All rights reserved.
tannoy.com/pro
Colour
Black
White
EN54
certified
V 1.00 - 18/09/13