< Wi-Fi >
Wi-Fi – Turn on Wi-Fi to connect to available Wi-Fi networks.
TIP! How to obtain the MAC address
To set up a connection in some wireless networks with MAC filters, you may need
to enter the MAC address of your phone in the router.
You can find the MAC address in the following user interface: touch Apps tab >
Settings > Wi-Fi >
< Bluetooth >
Turn the Bluetooth wireless feature on or off to use Bluetooth.
< Data usage >
Displays the data usage and set mobile data usage limit.
< Call >
Configure phone call settings such as call forwarding and other special
features offered by your carrier.
Fixed dialing numbers – Turn on and compile a list of numbers that can
be called from your phone. You'll need your PIN2, which is available from
your operator. Only numbers within the fixed dial list can be called from
your phone.
Save unknown numbers – Save unknown numbers to contacts after a call.
Voicemail – Allows you to select your carrier's voicemail service.
Incoming call pop-up – Displays incoming call pop-up when using
camera and videos.
Call reject – Allows you to set the call reject function. Choose from Call
reject mode or Reject calls from.
Decline with message – When you want to reject a call, you can send a
quick message using this function. This is useful if you need to reject a call
during a meeting.
> Advanced > MAC address.
79