General Operation - HQ-Power HPD30 Manual Del Usuario

6. Operation

6.1 General Operation

Switching on/off.
Hold the MF button pressed for 3 seconds. You will hear a beep and
the LED will switch on/off.
Volume up/down.
Tap the volume up/down button to increase/decrease the volume
level.
Previous/next.
Tap the previous/next button to jump to the previous/next track.
Play/pause.
When the device is paired, tap the MF button to play/pause the
track.
Answer/transfer call.
With an incoming call, tap the MF button to answer the call or
double-tap to transfer the call to a paired mobile phone.
End call.
With an ongoing call, tap the MF button to end the call.
Reject call.
With an incoming call, hold the MF button pressed for 2 seconds to
reject the call.
Last number redial.
Double-tap the MF button to redial the last used phone number.
Enter the pairing mode.
When switched off, hold the MF button pressed for 8 seconds to
enter the pairing mode. You will hear two beeps; the red and blue
LEDs will flash alternately.
Multi-point connection.
In pairing mode, tap the MF button to enable the multipoint
connection, double-tap the MF button to disable the connection.
Factory reset.
Hold the volume up and down buttons pressed for 5 seconds to clear
the list with paired devices.
6.2 Pairing the Device
Mobile Phone
1. Switch on the wireless function on your mobile phone.
2. Switch on the headphone.
3. Search for the headphone on your mobile phone. Select it and follow
the mobile phone's instructions to pair.
4. If requested, enter the password (0000) and confirm.
V. 02 – 23/05/2018
HPD30
5 ©Velleman nv