Technical Specifications - Perel ABC16AN Manual Del Usuario

5.2 Vehicle with Grounded Positive Post
1. Connect the negative cable (-, black) to the negative terminal of the
discharged battery.
2. Connect the other end to the negative terminal of the booster battery.
3. Connect the positive cable (+, red) to the positive terminal of the
booster battery.
4. Connect the other end to the engine block of the stalled vehicle, away
from the battery. Stand back and do not connect to the negative post!
5. Start the booster vehicle and then the stalled vehicle.
6. Disconnect the cables in reverse order. Keep both running for a few
minutes.

6. Technical Specifications

cable section
capacity
length
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device. For more info concerning this product
and the latest version of this manual, please visit our website
www.perel.eu. The information in this manual is subject to change
without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 02 – 17/04/2015
ABC16AN/ABC25AN/ABC16ALN
ABC16AN/ABC16ALN
16 mm²
max. 220 A
3 m
5
ABC25AN
25 mm²
max. 350 A
3.5 m
©Velleman nv