Safety Instructions; Setting The Day And Time - Perel E305W3 Manual Del Usuario

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device should be returned to your
distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Perel! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
2.

Safety Instructions

•
Indoor use only.
•
Keep the device away from children and unauthorised users.
•
Do not connect to an appliance with a load exceeding the capacity of the timer (see Technical
Specifications).
•
Do not use a timer to control an appliance containing a heating element (cooking appliance, heater, iron...).
•
Never leave the appliance unattended while in use.
•
Always make sure the plug of the connected appliance is fully inserted into the timer.
•
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
3. Operation
3.1

Setting the day and time

1. Unplug the timer from the outlet.
2. Press and hold SET until the day flashes.
3. Press or to change the day. Press SET to confirm. The hour digit flashes.
4. Press or to change the hour. To change it more quickly, press and hold
The minutes digit flashes.
5. Press or to change the minutes. Press SET to confirm.
Time Format (AM/PM or 24 hour)
To change the time format, press and hold CLOCK until the display changes.
3.2 Daylight savings time function
1. Press CLOCK and
the LCD.
2. Press CLOCK and
3.3 Setting a program
1. Unplug the timer from the outlet.
2. With the LCD in normal time display, press
shown on the lower left corner of the LCD:
"1" indicates the program group number (program group is from 1 to 14)
o
"ON" indicates power on time.
o
"OFF" indicates power off time
o
3. Press or to set the program group and on/off status. Press SET to confirm.
4. Press or to set the day. Press SET to confirm.
5. Press or to set the hour. Press SET to confirm.
6. Press or to set the minutes. Press SET to confirm.
V. 01 – 14/07/2015
E305W3 - E305W3-G
USER MANUAL
at the same time. The time display automatically adds one hour and "S" is shown on
again to exit daylight savings time.
once to change to program setting display. "1ON" will be
2
or . Press SET to confirm.
©Velleman nv