Greencut CD-230P Manual De Instrucciones página 34

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

34
All information included in this manual is relevant to your own safety and that of your environment. If you have any
questions about the information included in this manual, consult a professional or contact the Authorised Service Centre.
The following information on hazards and precautions includes the most probable situations that may arise during the use
of this machine.
Check all the documentation, packaging and product labels before using it. If you encounter a situation not described in
this manual use common sense to use the machine as safely as possible and, if you see any danger, do not use the machine.
USERS
This machine has been designed to be manipulated by users of legal age who have read and understood these
instructions. Do not allow people under age and people who do not understand these instructions to use the
machine.
Familiarise yourself with this machine before using it. Make sure you know where all the controls are, the security
devices and how they should be used.
If you are an inexperienced user, it is highly recommend that you practice doing simple jobs and, if possible, in
the company of an experienced person.
SECURITY
During charging, the batteries emit explosive gases. Do not smoke and do not bring flames, sparks or heat
sources close to the machine.
This battery charger has switches that can cause arcs or sparks, so if it is used in a garage or similar environment,
place it in a protected area.
Keep charging batteries in a cool, dry place. Do not expose to rain or snow.
Do not use the battery charger to recharge non-rechargeable batteries.
Unplug the power cord from the mains before connecting or disconnecting the battery charging cables.
Do not connect or disconnect the clamps to the battery when the charger is in operation.
In order not to damage the electronic components of vehicles, please observe carefully the warnings given by the
brand of the vehicle or the batteries used.
Do not use the battery charger inside a car or on the hood.
Check that the available supply voltage corresponds to that indicated on the data plate of the battery charger.
The battery charger is protected against indirect contacts by a ground conductor, as prescribed for Class I devices.
Check that the socket is equipped with a protective earth connection.
For models with cable with plug and "P.MAX START" power greater than 9kW, we recommend replacing the
plug with a plug of a capacity suitable for the fuse indicated on the plate. On models that do not have a fuse,
connect pins of suitable capacity to the fuse value indicated on the plate.
If you have any questions, please contact the Official Technical Service.
MACHINE CARE, TRANSPORT AND STORAGE
Check that all safety features are installed and in good condition.
Do not force this machine or modify the controls.
Before adjusting or repairing the machine, stop and disconnect it completely.
Replace the power cord with an original cord only.
Carry out regular maintenance on the machine. We recommend that maintenance and repairs not described in
this manual be performed by an Official Service Facility.

Publicidad

Tabla de contenido
loading

Tabla de contenido