Syncronorm VNANO 512 Instrucciones De Uso página 44

- GB -
Hauptmenü Untermenü 1
7. Master Grandmaster
Windmaster 1..3
Submaster 1 .. 4
...
8. Setup
Caption
Universe DMX1
Universe DMX2
RDM Mode DMX1
RDM Mode DMX2
Digital Outputs
Date
Time (UTC)
Timezone
IP-Address
Subnet-Mask
Software Version
MAC-Address
OS-Version
Licence Info
Untermenü 2 Untermenü 3
Set
Grandmaster
Basic Value 1 Edit Value 1
Basic Value 2 Edit Value 2
Basic Value 3 Edit Value 3
Ramp Down Edit Ramp Down
Ramp Up Edit Ramp Up
Waiting Time Up Edit wait time
Set Submaster
1..4
Edit Caption
Select Universe
Enable RDM
DMX1(2)
DO 1 Patch Edit Patch
DO 2 Patch
...
DO 1 Mode Change Mode
DO 2 Mode [Standard
... /Remanent]
Edit Date
Edit Time (UTC)
Select Timezone
Edit IP
Edit IP-Mask
Beschreibung
Show the grandmaster in percent. The value can
be adjusted by using the CURSOR keys
[0..100]%.
Show the selected wind master in percent. The
value will be updated by the wind speed.
Show the interpolation value No.1 of the
characteristic curve.
Show the interpolation value No.2 of the
characteristic curve.
Show the interpolation value No.3 of the
characteristic curve.
Fading down speed in percent per second of the
windmaster.
Fading up speed in percent per second of the
windmaster.
Waiting time in seconds before the windmaster
is fading up after fading down.
Show the submaster in percent. The value can
be adjusted by using the CURSOR keys
[0..100]%.
The menu Setup contains all important
configuration parameters and information.
The caption label can be changed according to
the project. The text will be shown at the
DEPENCE software.
The DMX ports can be linked to Universe 1 or
Universe 2.
The RDM function can be switched on or off for
each DMX port.
Each digital output can be linked to a DMX
Universe and address.
Each digital output can be operated either in
Standard or in Remnant mode.
Shows and edits the current date in format: JJJJ-
MM-DD.
Shows the current time as „coordinated
universal time" UTC.
Shows the current time zone. The time zone can
be selected from UTC (coordinated universal
time) and CET (Central European Time, UTC+1)
with daylight-saving time. CET is the
recommended choice.
Shows and edits the IP-Address. Default setting:
192.168.003.011
Shows edit the subnet-IP mask. Default setting:
255.255.255.000
Shows the software version label.
Shows the network MAC address.
Shows the current operating system label.
Shows the location of the GPL and copyrights.