p20 Scooot User Manual
3
The Ride Configuration
Adjust and secure all components as
recommended in Section 9.2 and check
elastic straps for any sign of damage,
wear or tear. If there is damage, do not
use the product and contact Customer
Services for advice. Position Scooot so
that it will not move whilst your child
transfers in to it.
Adjust the footrest to suit your child's
leg-length so that their feet do not
extend beyond the end of the footrest.
See Section 9.2 Steps 4-6.
Open the belt and ensure it is clear
of the seating area. Place your
child so that their back is up against
the backrest.
Ensure your child is
comfortable and stable
in the Ride configuration
before use.
Attach the belt around the child's waist.
Clip together and pull the two D-rings
away from the centre buckle to tighten
the belt, ensuring the webbing does
not become twisted.
When using Ride, children can propel
themselves using the wheels. Pushing
both wheels forwards will result in
forward movement, and pushing
backwards will result in backward
movement. Pushing forward on the
right wheel will result in a left turn,
and pushing forward on the left wheel
will result in a right turn. Pushing
backwards on the right wheel will
result in a right turn, and pushing
backwards on the left wheel will
result in a left turn.