Important Safety Instructions - Ryobi Tek4 RP4530 Manual Del Operador

WARNING -
Read all instructions. To reduce the risk of injury,
user must read instruction manual. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY
 Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
 Do not operate battery products in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Battery products create sparks
which may ignite the dust or fumes.
 Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
 Do not expose battery products to rain or wet
conditions. Water entering a power tool will increase the
risk of electric shock.
 Do not abuse the accessory cord. Never use the cord
for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
 Use battery only with charger listed. For use with 4V
lithium-ion battery packs, see tool/appliance/battery
pack/charger correlation supplement 988000-312.
PERSONAL SAFETY
 Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention
while operating battery products may result in serious
personal injury.
BATTERY PRODUCT USE AND CARE
 Do not use the product if the switch does not turn it
on and off. Any product that cannot be controlled with
the switch is dangerous and must be repaired.

IMPORTANT SAFETY INSTRUCTIONS

 Use the product in accordance with these instructions
and in the manner intended for the product, taking into
account the working conditions and the work to be
performed. Use of the product for operations different
from those intended could result in a hazardous situation.
 Ensure the switch is in the off position before inserting
battery pack. Inserting the battery pack into battery
products that have the switch on invites accidents.
 Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
 Use this product only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
 When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
 Under abusive conditions, liquid may be ejected from
the battery, avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
 When servicing the product, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of unauthorized
parts or failure to follow Maintenance instructions may
create a risk of shock or injury.
 The noise reduction capability of these headphones
are 25NRR. They will not provide ultimate protection of
your hearing only reduce the ambient noise; therefore
they may not be suitable for every situation. If at anytime
you are uncomfortable using this product discontinue use
immediately.
 The headphones are capable of playing music from
an auxiliary source. This music should not be played if
the music distracts you from your work. The music should
not be played while operating machinery of any kind.
 This product should not be used without the battery
cap installed.
3