THERM PRO TP-65S Manual De Instrucciones página 3

5. Humidity range: 10% ~ 99%.
6. Temperature display unit: °C and °F selectable
7. Temperature Resolution: 0.1 °C/°F
8. Humidity Resolution:1%
EN
9. Low battery indication
10. Four touch buttons
11. Backlight
Touch buttons
CHANNEL/SYNC: Press once to display the temperature readings from
up to 3 outdoor remote sensors; Press and hold this button to enter the
synchronization mode.
MAX/MIN/CLEAR: Touch once to display the maximum or minimum
temperature and humidity; Press and hold to clear the data history.
° F/°C/History: Press to select the temperature display in ºC or ºF; When
the display shows the maximum or minimum temperature and humidity.
Touch this button once to set the maximum and minimum data record
time interval between ALL TIME or 24 hours.
Note: Both ALL TIME and 24 hours keep records based on the last time
you manually cleared the data history or installed a new battery.
: Touch once to turn on/off backlight. The backlight will automatically
turn off after 15 seconds after the last button press.
Temperature & humidity trend
1. indicates the temperature & humidity is in an increasing trend.
2. indicates the temperature & humidity is in a no change trend.
3. indicates the temperature & humidity is in a decreasing trend.
-4-
Outdoor remote sensor (transmitter) features
LED
1. Built-in rechargeable lithium battery: Type 18650
2. Rain-proof and wall-mounted
3. Outdoor Temperature range: -58°F~158°F(-50°C ~ 70 °C)
4. Adapter input：AC100-240V
Adapter output：DC5.0V 300mA
Buttons
To access CHANNEL SELECTOR and RESET buttons, you need to
unscrew the cover.
CHANNEL Selector (1,2,3): Slide to set Channel 1,2 or 3.
RESET: Press once to reset the remote sensor.
: Press and hold for 2 seconds to turn ON/OFF the unit.
(ON: Flash 1 time , OFF: Flash 3 times)
Wall Mount
Temperature
Sensor
Charging
Socket
ON/OFF
Channel
design
50/60Hz;
-5-
Reset
EN