Olympus P-11 Manual De Instrucciones página 6

Safety precautions
WARNING
Do not damage the power cord
Do not damage or modify the power cord.
A damaged power cord may result in fire or electric shock. To
prevent the cord from becoming damaged, DO NOT: pull on the
cord to unplug it, bend the cord excessively, or place heavy objects
on the cord.
If the power cord is damaged, contact your nearest Olympus
service center.
Do not disassemble or modify the printer
The printer has both hot and high voltage parts on the inside.
Touching these parts may result in burns, electric shock, and/or
damage to the printer. Never attempt to disassemble or modify the
printer as this may lead to electric shock or printer malfunction.
For service or repair, contact your nearest Olympus service center.
Do not allow liquids near the printer
If liquid gets into the printer, it may result in fire or electric shock.
Do not place heavy objects on the printer
Heavy objects may damage the printer cabinet, resulting in fire or
electric shock.
Damage may also result from the printer being dropped or falling.
Do not install the printer in the following places
To prevent fire, electric shock, and printer malfunction, do not install
the printer in the following places:
Dusty, humid, or oily places
Should any dust or liquid get into the printer, it may result in fire
or electric shock.
Extremely hot places
Do not expose the printer to direct sunlight (for example, inside a
car or near a window) or extremely high temperatures (for
example, near a heater). Doing so may damage the printer
cabinet, resulting in fire or electric shock.
Use the printer in an environment with an ambient temperature
between 5 to 35°C (41 to 95°F) and humidity of 20 to 80%.
6