System Requirements; Driver Installation - i-tec C31POCKET4KDOCKPD Manual De Instrucciones

Quick Start / USB-C Pocket Docking Station EN

SYSTEM REQUIREMENTS

Hardware requirements: Requires USB-C interface with „DisplayPort
Alternate Mode" and „Power Delivery" support (not all devices
/ systems with USB-C interface support this as standard) or
Thunderbolt 3 port
Operating system: Windows 10 32/64bit, macOS X, Linux, Google
(Chrome OS and Android 6 and higher) with latest updates

DRIVER INSTALLATION

Windows 10 32/64bit: After connection, the drivers for the docking
station are installed automatically on the system. Before installation
make sure that your system has installed the latest drivers for your
device and updated BIOS.
macOS X: Installation of the drivers in macOS X is automatic. Before
installation make sure that your Mac has installed the latest OS for
your device.
CONNECTING A HDMI MONITOR
The docking station is equipped with 1x HDMI 4K Ultra HD port for the
connection of an external monitor or projector with a HDMI interface.
For displaying your images you can use a modern plazma or LCD
monitors and TVs. The graphic chip, which is the heart of the docking
station, supports up to 4K resolution 3840x2160@30Hz. Connect the
monitor to the docking station using a highquality HDMI cable. During
installation of an additional monitor the screen of the notebook or
tablet can flicker which is a standard condition.
CONNECTING A VGA MONITOR
The docking station is equipped with 1x VGA Full HD port for the
connection of an external monitor or projector with a VGA interface.
For displaying your images you can use a plazma or LCD monitors
and TVs. Connect the monitor to the docking station using a VGA
cable. During installation of an additional monitor the screen of the
notebook or tablet can flicker which is a standard condition.
It is not possible to use both graphic outputs simultaneously, a single
monitor only can be connected to the docking station (HDMI or VGA).
9