Quick Start / i-tec USB-C Docking Station
If the USB-C/Thunderbolt™ 3 only supports DisplayPort 1.2, the maximum
resolution is 3x 1920x1080/30Hz.
Note: 3 external monitors can only be connected when the laptop's internal
screen is off. This is a limitation of the Intel graphics card.
The resolution, the frame rate and the maximum number of connected external
monitors depends on the capabilities of the host PC/laptop.
The majority of problems with the docking station and the connected
peripheral devices can be solved by disconnecting the USB-C cable of the
docking station from the USB-C port of the PC / Mac / smartphone and
reconnecting after approximately 10 s.
SAFETY INSTRUCTIONS
• Do not expose to extreme temperatures and air humidity.
• Use the device on flat surfaces – this will prevent it from slipping and
potentially causing damage to the product.
• Keep the user manual for future reference.
In co-operation with the service department:
• Check the functionality if the product receives any damage.
• Send the device back if it does not work in accordance with the user
manual.
FREQUENTLY ASKED QUESTIONS
Available on our website www.i-tec.cz/en/ on the "FAQ" tab of this product.
8 |
ENGLISH
- 3 monitors connected via DisplayPort/
HDMI cables - resolution up to 4K
3840x2160/30Hz.
Only if your laptop's USB-C/Thunderbolt™ 3
connector supports DisplayPort 1.4 DSC.
If the USB-C/Thunderbolt™ 3 only supports
DisplayPort 1.4 without DSC, the maximum
resolution is 3x 1920x1080/60Hz.
DEUTSCH