Osatu KALE-6 Manual De Uso página 7

EN
1
FIELD OF APPLICATION
This sprayer has been manufactured with fi rst quality materials and exclusively designed to be used with agricultural phytosanitary products
and garden products (herbicides, insecticides, fungicides).
2
SETTING UP AND SPRAYING
It is advisable to carry out the setting up verifi cation procedure with water:
1) Attach the hose to the lance and the lower part of the tank. Attach the straps (see drawing detail). Verify that all the elements are
suitably screwed on, with the objective of avoiding possible leaks of the chemical product to spray.
2) Fill the tank.
3) Tightly screw the entire chamber to the tank and pressurise the sprayer performing strokes (20 approx.). In the event that the maximum
pressure is exceeded, the valve will act as a safety valve, releasing the excess pressure. Check it.
4) To start the treatment press the handle of the lance and regulate the nozzle in order to obtain the desired spray. Compensate pressure
loss by activating the chamber again.
3
MAINTENANCE
1) After each use depressurize the sprayer.
2) Clean the tank and the rest of the components (nozzles, fi lter...) with water.
3) In the event of obstruction of the nozzle or fi lter, clean them with water and do not use metallic objects.
4) To prolong the lifespan of the joints, regularly apply some drops of oil or grease on the moving parts.
5) To proceed with the replacement due to wear and tear of the chamber's retainer (part 164), remove the clip on the upper part of the
chamber and pull the handle.
6) Store the sprayer indoors protected from frost and extreme heat (between 5º and 30º C).
4
SECURITY REGULATIONS
1) Do not use chemical products out of the indicated application fi eld
2) Always respect the instructions and dosage, on the packaging labels, that the manufacturer recommends for the treatment product that
you will be using.
3) Do not eat, drink or smoke during the preparation and the treatment.
4) Do not use the spray on persons, animals, or electric installations.
5) Do not use the treatment when there is strong wind or extreme heat.
6) In case of intoxication, consult your doctor and provide him/her with the package of the treatment product.
7) Do not dump product or cleaning residues near courses of water, wells, etc. that are going to be used for human or animal consumption.
8) Use proper protection equipment, masks, glasses, gloves, shoes, etc.
9) Do not modify the sprayer, nor block the safety valve. Do not connect it to an external pressure source (manual use only). Do not use
the device if it is damaged, deformed or if its original shape has been altered.
10) Store the sprayer indoors protected from frost and fi erce heat (between 5º and 30º C).
GUARANTEE
Our goods are guaranteed for three years from the user's purchase date against all manufacture or material fl aws. The warranty is strictly
limited to free replacement of parts that our services consider defective. The warranty shall not apply in case of improper use of our
materials, disassembly and/or alterations performed to our devices, and to those parts of normal wear and tear that require maintenance.
The warranty shall not apply in case of negligence, imprudence and irrational use of the material. Dispatch and transportation costs of parts
under warranty as well as workmanship that were not performed in our factory shall be borne by the user. To invoke this warranty, send us
the faulty part, carriage free, together with the receipt or the purchasing invoice.
GOIZPER RECOMMENDS REGULATOR USE
Use the pressure regulator to obtain an optimum spraying ensuring
an effective treatment for each crop, a moderate consumption of
water and phytosanitary product so as to respect nearby crops and be
environmentally friendly.
The use of the pressure regulator that Goizper has fi tted as a standard
feature in the sprayer you have just purchased, ensures a constant exit
pressure and uniform droplet size.
This accessory, designed and only patented by Goizper, allows to tailor
the equipment to the type of treatment to be performed:
- For herbicide treatments use the low pressure application (1.5 bar-
red indicator-ON position), to obtain thicker droplets and to prevent
drift and the risk to contaminate adjacent crops. Use the defl ective or
fan nozzle which maximises the effi ciency of the treatment.
- The OFF position ensures the free fl ow of liquid and allows the
depressurization of the accessory.
The regulator is delivered assembled in the ON position (adjusted) and the red indicator. To depressurize the accessory always switch it to the OFF
position (see detail drawing). The regulator must necessarily be assembled between the handle and the plain tube lance (see drawing detail).