Mechanical And Acoustical Features; Dimensions; Sound Coverage - dB Technologies OPERA 10 Manual Del Usuario

English

MECHANICAL AND ACOUSTICAL FEATURES

DIMENSIONS

The OPERA series has been designed with the intent to optimise weight and dimensions.
The cabinet is lighter but more resistant, and features 2 handles, one on the side and one at the top, for easy
handling.
For a quick comparison of the 3 models, the overall dimensions are the following:
OPERA10 - 300 mm (L), 552 mm (H), 301 mm (W)
OPERA12 - 349 mm (L), 642 mm (H), 350 mm (W)
OPERA15 - 420 mm (L), 772 mm (AH), 419 mm (W)

SOUND COVERAGE

The special design of the horn, shown in the figure, is
common for all 3 models.
In horizontal, the coverage is differentiated between the
value of 85° (upper part) and 120° (lower part).
This is to optimise sound emission, for example during
vertical installation in reverberant environments.
The special design of the horn, shown in the figure, is
common to the 3 models. The overall vertical opening (85°) is
asymmetrical, to increase the sound pressure of the horn at
long distance.
In case of use with monitoring function or in case of
horizontal positioning (wall-mounted) of the speaker, take
these data into account so as to calculate the correct coverage
of the environment.
COD. 420120247 REV. 1.1
OPERA10 OPERA12 OPERA 15
22