Package Contents; System Requirements - i-tec U3METALG3HUB Manual De Instrucciones

EN Quick Start / USB 3.0 HUB 3 Port + Gigabit Ethernet Adapter
INTRODUCTION
The HUB offers three USB 3.0 ports. The Gigabit Ethernet port allows
user's computer instantly connect to a 10/100/1000 Mbps network.
SPECIFICATION
• 1x USB 3.0 type A connector to connect HUB to laptop / tablet / PC
• 3x USB-A 3.0 port for connecting USB equipment, backward
compatible with USB 2.0
• 1x Ethernet 10/100/1000Mb/s LAN RJ-45 port with function MDI/
MDIX and self-correction
• Realtek 0411 Chipset – USB 3.0 HUB
• Realtek 8153 Chipset – USB 3.0 to Gigabit Ethernet – supports
standard IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3az
(Energy Efficient Ethernet)
• LED indication for Ethernet connection
• Supports Wake-on-LAN
• Operation temperature: 0-40°C
• Storage temperature: -10 to +80°C
• Humidity: up to 85%
• Dimensions: 96 x 30 x 21 mm
• Weight: 65 g

PACKAGE CONTENTS

• i-tec USB 3.0 HUB 3 Port + Gigabit Ethernet Adapter with
integrated cable (28 cm)
• Quick Installation Guide

SYSTEM REQUIREMENTS

Hardware requirements: laptop / tablet / PC with free USB 3.0 port
Operation System: Windows 7 / 8 / 8.1 / 10 32/64 bit, macOS X, Linux,
Android
Note:
Prior to installing the USB 3.0, make sure that there are (for the USB
3.0 controller in the laptop / PC) installed the latest drivers for it. In
case of outdated USB 3.0 drivers problems during installation or use
may occur.
Installing the USB HUB (USB 3.0 ports type A) is automatic from
8