Cleaning And Sterilising; After Each Use; Cleaning (Figure A In Reverse Order); Sterilising - NUK LUNA Instrucciones De Uso

Mipu LUNA Cluster 2.book Seite 8 Freitag, 17. Mai 2013 3:18 15

5. Cleaning and Sterilising

Hygiene is the top priority when
handling breast milk and all
parts which come into contact
with it. You should therefore
only use a pump that is clean and
sterilised.

5.1 After each use

• Parts 1 to 10 (not parts 11 to 20)
should be washed thoroughly in water
and sterilised
immediately
every use.
5.2 Cleaning
(Figure A in reverse order)
Unplug mains adapter 19 from
Caution!
the wall socket before cleaning.
Clean lip valve 5 carefully. We
Caution!
recommend just rinsing off the lip valve
and boiling it to
implements may lead to damage.
1. If you are using silicone cushion 1,
release this fully from breast shield 3.
2. Unscrew motor
connection ring 4 from breast milk
container 6.
3. Remove lip valve 5 from the underside
of the breast shield 3.
4. Unscrew connection ring 4 from motor
unit 13.
5. Take motor unit 13 off breast shield 3.
6. Remove valve 2 from breast shield 3.
7. Wash parts 1 to 10 (not parts 11 to 20)
under running water and rinse.
You can also use a little mild detergent
(e.g. NUK Baby Bottle Cleanser).
Milk residues may
material and result
growth.
8. Wipe motor unit 13 with a damp

5.3 Sterilising

Before sterilising, clean as described in the
section entitled "5.2 Cleaning (Figure A in
reverse order)".
after
Important!
sterilise the stand, the motor unit or the
mains adapter (parts 11 to 20), as this
would deform the material and/or damage
the electronics.
• Use a NUK Steam Steriliser. Follow the
sterilise. Cleaning
• boil the parts for 5 minutes in a pan of
unit 13 and
• Only
Important!
thoroughly cooled down and completely
dry before being reassembled and used
again.
damage the
in microbial
8
cloth.
immerse the motor
Caution! Never
unit and the mains adapter in water, as
this will damage the electronics.
Under no
operating instructions associated with
the device. Alternatively,
vigorously boiling water. Ensure there
is sufficient water in the pan to avoid
damage.
the NUK Microwave
Steriliser should be used for sterilising
in a microwave.
manufacturer's instructions
using any sterilisers
solution in order to prevent damage to
the product.
The sterilised parts must be
circumstances
Steam
Follow the
when
or sterilising