Global Mode; Midi Channel - Akai Professional MPD226 Guia Del Usuario

Tempo
(Tap Tempo)
BPM: The tempo as indicated in beats per minute. The available range is 30–300 BPM.
Time Division: The speed of the Note Repeat repetition as a division of the master tempo or
external clock. The available options are 1/4, 1/4T, 1/8, 1/8T, 1/16, 1/16T, 1/32, and 1/32T. (T
denotes a triplet-based time division.)
Gate: The length of the repeated notes of the Note Repeat feature. The available range is 1–
99% of the current time division setting.
Swing: The amount of swing used in the repeated notes of the Note Repeat feature. The
available range is 50–75%.
Transport
(Stop, Play, Rec)
Type: The type of event that will be sent. The available settings are MMC, MMC/MIDI, MIDI
Real Time, MIDI CC, and PTEX. When set to PTEX, transport control messages will be sent
only on USB Port B, Channel 16, regardless of the Common Channel (Common Chnl) setting.
The PTEX setting is for use with Avid
MIDI to DIN: Determines whether or not MIDI data is sent to the MIDI Out (On) or not (Off).
MIDI data will be sent to MPD226's USB connection regardless of this setting.

Global Mode

To enter Global Mode, press Global.
In each page of Global Mode:
•
Use the up/down Cursors to move through the parameters on the current page.
•
Use the left/right Cursors to move between different pages.
•
Turn the Data Dial to change the currently selected value/setting. Any value/setting is
automatically selected; you do not have to press the Data Dial to enter or select it.
Important: To store your global settings, see the
See the following sections for specific information about each control's editable parameters.

MIDI Channel

Common Chnl (Channel): This setting determines which MIDI channel is the common
channel (various controls can be assigned to the common channel in Edit Mode). The available
settings are USB A1–A16, and USB B1–B16.
Note Display
Type: Determines whether the display will show notes as Values (e.g., C2, F#3, etc.) or a
Number (e.g., 36, 54, etc.).
® ®
Pro Tools Express only.
Utilities section below.
11