To Activate/Deactivate Feature Lighting; To Activate/Deactivate The Height Adjustment Function - Miele DARC 6 Instrucciones De Manejo

After approx. 10 seconds, the remote
control LED flashes on and off twice
with a longer gap between the flashes.
The remote control is now signed off.
The LED will go out after a short while.
 Confirm the signing off procedure on
the cooker hood by pressing the
515 run-on control. All the indicator
lights will go out.
Note that disabling the signal will also
deactivate any Con@ctivity 2.0
function and this will have to be
activated again.
* for appliances with sensor controls
To activate/deactivate feature
lighting 
If your cooker hood has feature lighting
in addition to the hob lighting, e.g. glass
edge feature lighting, it can be switched
on and off using the remote control.
This function must also be activated on
the remote control.
 Press both arrow controls  at the
same time and hold for about 5
seconds until the remote control LED
flashes.
 Press the control for the feature
lighting .
 To activate press the "" control, to
deactivate press the "" control
Programming is completed
automatically.
en - Signing on/off the remote control
To activate/deactivate the
height adjustment function 
If your cooker hood has a motorised
height-adjustable canopy, this can be
adjusted using the remote control.
This function must also be activated on
the remote control.
 Press both arrow controls  at the
 Press the button for the run-on option
 To activate press the "" control, to
Programming is completed
automatically.
same time and hold for about 5
seconds until the remote control LED
flashes.
.
deactivate press the "" control
19