Schwaiger DABWORK 513 Manual De Instrucciones página 24

USER GUIDE
TIME/DATE
This option lets you set the time and date manually.
The hours will blink when you select the "Time" submenu. Turn the Tuning/Enter knob to scroll through the
hours, and then press it to select the required hour.
When you've done this, the minutes will start to blink. To set the minutes, repeat the process you used to set
the hours. When you've chosen this, the screen will let you set the date.
As you did when you set the hours and minutes, turn the Tuning/Enter knob to scroll through the dates, and
then press it to select the date and continue to the next value. When you've selected the last value, the display
will confirm that the new time and date have been saved.
BACKLIGHT
This sets the brightness of the display, and how long it remains on.
Turn the Tuning/Enter knob to scroll through the options, and then press it to select one.
The options are: Time Off > Brightness > Dim
TIME OFF
This specifies how long the display stays on before it goes off. Turn the Tuning/Enter knob to scroll through the
options, then press it to choose one of the following values:
On > 10 > 20 > 30 > 45 > 60 > 90 > 120 > 180 (seconds)
The asterisk in the top righthand corner shows the current selection.
BRIGHTNESS
This option lets you set the brightness of the active display.
Turn the Tuning/Enter knob to scroll through the options, and then press it to select one of these:
High > Medium > Low
The asterisk in the top righthand corner shows the current selection.
24