HC Cargo 161048 Manual De Usuario página 3

GB
Features
• 7" High Resolution Color TFT-LCD. LED backlight.
• 8V-32V DC power input, suitable for all kinds of vehicles.
• Removable sun visor.
• Double Digital Wireless signal transmit. Support sub-screen and two screens.
• After pairing successfully, you can switch between the two channels manually or automatically.
• PAL/NTSC optional, suitable for various countries;
• No image reverse function, default CAM1 mirror image, CMA2 normal image.
• Monitor abides by the idea of energy-saving, low carbon and environment protection.
• High shock resistant rating: 8G.
• Menu manual operation.
• Monitor housing is made by ABS and is high temperature resistant.
• Load dump V=87V, Td=400mS.
• Monitor circuit has protector for battery reverse(+/-).
iNotes
1) Please read this manual before using our products.
2) Before connecting to power, check the connection of cables. If improperly connected, damage
may be done to the picture.
3) The monitor is not waterproof; do not place the monitor outdoors.
4) In order to avoid damage to components, do not activate or use these products while carrying out
Welding operations on your vehicle
5) For flawless function make sure that all cables are connected tightly.
6) Do not open the housing of the camera, as this will damage the waterproof device and chipset
inside.
7) Do not put the cables together with high temperature and rotary objects.
8) In order to evacuate the high temperature inside the monitor, do not block the holes in the
shell.
9) High voltage inside the monitor; non-specialists should not open the back shell.
10) While driving, do not watch DVDs etc.
11) Do not use caustic chemicals to wipe the camera and monitor.
Warning
There are no reparable parts in the system, so avoid taking apart the CCD camera or the monitor due to high
voltage danger in the products. Repair and regulation of the products should be done by special workers.
Notice
This manual is for reference only. You will receive no notification about changes in the information. Any wrong
or un-detailed information is the responsibility of the manufacturer.
Before you request a repair
The problems below do not necessarily indicate a failure in the display.
Please check through the following methods before you request for repair.
Problem
No picture
Dark picture
No color
Possible Causes
Improper connection with automobile adapter.
Use of unauthorized power supply. Power Switch is in OFF position.
Please check contrast and brightness.
Check if color is adjusted, or check if the color system (PAL/NTSC) is right.
3
161048
Vedpak 203_Version 1_05.2015