Operations; Trouble Shooting - Engel AV-PLUS Manual De Usuario

TRANSMITTER 2,4 GHz WIRELESS AUDIO/VIDEO
5 SWITCHING ON
1. Turn on the Transmitter and Receiver power.
2. Power on the A/V sources and Televisions.
3. Adjust the AV Channel.
Switch the Channel selector of Transmitter and Receiver to the same channel.
(Change the channel if there is any interferences)
4. Enjoy the Wireless A/V entertainment.
6

TROUBLE SHOOTING

Please read this user manual carefully before using the Wireless A/V Sender. If you still have
difficulties to use this product, please consult the following points that may guide you to
solve the most common problems.
NO PICTURE OR SOUND
• Check out if the adaptor is well connected.
• Check out if the Power ON/OFF switch is in the right position.
• Check if all the cables are well and rightly connected.
• Check out if the IR code of the Transmitter and Receiver is the same one, then press the
A/V sources button to make sure the Transmitter and Receiver have the same source.
INTERFERENCE IN THE IMAGE AND SOUND
• Move your Transmitter or Receiver slowly to find the best reception position for your A/V
system.
• Shorten the distance between your Transmitter and Receiver.
• Check if there is any interference radio frequency source near your Receiver source such
as a microwave oven.
• If there is any interference radio frequency source next to the Receiver, try to switch the
channel to get the best performance.
• Check out if the Transmitter and Receiver are at the same channel.
REMOTE CONTROL FUNCTION DOES NOT WORK
• Check if the Remote Control is out of battery.
• Make sure your Remote Control is able to align the Receiver IR window.
• Make sure the distance between your remote control & Receiver window; Receiver &
Transmitter are within the valid range.