Cleaning; List Of Functions; Diagram Of Functions - Ecler eCA120HZ Manual De Instrucciones

5. CLEANING

The eCA120HZ must not be cleaned with solvents or abrasive substances which may damage the
prints. Clean using a cloth moistened in water and a neutral liquid detergent, then dry with a clean cloth.
Under no circumstances allow water to enter any of the orifices in the equipment.

6. LIST OF FUNCTIONS

1. ON/STBY on or standby indicator light
2. DC24V power connector
3. CLIP indicator light
4. OUTPUT amplified signal 0V/70V/100V
5. SP input signal presence indicator light
6. VOLUME knob
7. Euroblock input line, STACK
8. RCA input line, LINE IN
9. RJ-45, REMOTE connector
10. REMOTE & AUTO STANDBY jumpers

7. DIAGRAM OF FUNCTIONS

8