Important Safety Instructions - dB Technologies ES1002 Manual Del Usuario

IMPORTANT SAFETY INSTRUCTIONS:

1. Read these instructions
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarazied plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11. Only use attachements/accessories specified by the manufacturer.
12. Use only with the cart, stand tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution, when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has benn damaged
in any way, such as power-supply cord or plug is damaged, liquid has benn spilled or objects have fallen into
the apparatusm the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
!
WARNING
• Never remove the product's front protection mesh.
In order to prevent electric shock hazard, in the event of accidental damage or replacement of
the protection mesh (which must be carried out by a service center), disconnect the power supply
immediately.
Do not connect to the power supply while the mesh has been removed.
ATTENTION
• Ne pas déposer la grille frontale de protection du produit. Pour prévenir le risque de choc ou dé-
charge électrique, en cas d'endommagement accidentel ou de remplacement de la grille de protec-
tion (opération à confier au service d'assistance), couper immédiatement la tension d'alimentation
du système. Ne jamais connecter le système au secteur si la grille de protection est déposée.
ES-1002
!
Cod. 420120265 REV. 1.0
3