Axess SPBT1064 Manual De Instrucciones página 3

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Control Panel Function
1
2
3
4
5
6
7
1. On/Off button / Volume knob
2. USB port
3. Aux-in jack Bass knob
4. LED display
5. Mode (Switch Bluetooth, USB disk, FM and AUX-IN mode)
6. Backward
7. Play/Pause
8. Forward
9. Charging port
10. Mic input
11. Guitar Input
12. Mic volume knob
MIC VOL
8
9
10
11
12
POWER SOURCE
1.Please charge the unit at least 4 hours before first time using.
2.Long press the POWER button on the panel to switch on or off
the speaker.
CHARGE THE BATTERY
When the battery is charging, the CHARGE STATUS lights red.
After the battery has fully charged, the light turns to be green.
1.Connect the AC adaptor to the DC IN JACK of the speaker firmly,
and plug it into a wall outlet.
2.When the battery is fully charged, first disconnect the AC adaptor
from the speaker,then from the wall outlet.
3.The speaker works normally when charging.
MODE SELECTION
Press MODE button on the front panel to select the MODE
(LINE,USB,BT OR FM).
PREVIOUS/NEXT BUTTON
By pressing PREVIOUS/NEXT button on the front panel, you can
select a specific song from the play list.
PAUSE/PLAY BUTTON
To stop playing the current track,please press PAUSE/PLAY button
on the front panel.Press it once again to continue playing.
VOLUME ADJUSTMENT DIAL
Twist the dial anticlockwise to decrease the volume and clockwise
to increase the volume.
MIC IN JACK
Plug in microphone directly for playing.
USB JACK
Insert USB card directly for playing
MUSIC PLAYING
1. Press and hold Power button for 2-3 seconds to "ON"
2. Insert USB flash disk into slot, audio files play automatically.
3. Under playing mode, short PREV or NEXT to select songs you
like, long press to fast forward or backward the song.
4. Spin VOL knob to adjust the volume up or down.
5. Press PLAY/PAUSE to play or pause.
6. For other compatible music devices or your MP3/MP4 players,
use the supplied audio

Publicidad

Tabla de contenido
loading

Tabla de contenido