How To Use Washer - Nevir NVR-4901 6K1000 Manual De Instrucciones

How to use washer

Use process
Before washing clothes for the first time, you must run a complete cycle without clothes.
To do this:
1. attach the cable and open the faucet.
2. Turn the program selection to the "standard cotton" position for 4900 series
3. Press "Start / Pause".
This will remove any remaining water from the manufacturing test still remains in the washer.
Washing preparation
1. Properly connect the inlet hoses and open the faucet.
2. After making sure that the electrical outlet is connected to earth safely, insert the plug into the outlet.
3. Attach the drain hose properly.
Preparation of clothing
1. Sort clothes by color and according to the information shown on the labels. Most garments have a tag on
the recommendations of washing, they are found in the neck or on the side
seam.
2. Check all pockets to make sure they are empty. Objects like nails, coins,
pieces of paper, etc... can cause damage to garments and machine
components.
3. Close zippers, etc... before washing.
4. Dark fabrics usually contain excess dye and should be washed separately
several times before being included in a mixed load. Always wash whites and
colors separately.
5. Heavily soiled areas, stains, etc... must be pre-treated with liquid
detergents, stain removers, etc..
6. Reverse Put woolen garments and clothing that can be easily lint before
putting them into the washing machine.
Introduction of the clothes in the washing machine
Spread the clothes and load them loosely in the drum. Mix large items with
small gives better wash results and also helps the load distribution is
adequate during centrifugation.
The most efficient use of energy and water washing is achieved when a full load is carried. However, do not
overload the machine as this will cause wrinkles and reduces washing efficiency.
Note Make sure that no garments are caught between the door and the seal
27