Axess PABT6021 Manual De Instrucciones página 2

TO CUSTOMERS
Thank you for your support and trust on purchasing the products of our
company. To fully exert the function of the product, we suggest you to read
the operating instruction carefully before using it, for the convenience of
grasping the connection method and using points. Please take care of the
operating instruction after reading it for the purpose of further reference.
SPECIFICATIONS
Double 6.5" speakers
10M Bluetooth range
Brilliant LED lights
True Wireless Speaker (TWS Link+)
AUX input and USB input
Microphone input
PANEL BUTTONS
Mode: Short press for switching among Bluetooth, TF card, USB, Line-in, FM
Long press for LED lights ON/OFF
: Play the previous music under Bluetooth, TF card and USB mode,
Play previous radio station under FM mode
: Short press for music play/pause
Long press for radio station automatic searching under FM mode
: Play to next music under BT, TF and USB mode
Play next radio station under FM mode
AUX: aux-in jack can connect the speaker to any PC, mp3, mobile phone, etc
OFF/ON: switch for powering OFF or ON the speaker
USB Port: Support USB and can play MP3 and WAV format music in U disk
TF Card Port: support TF card and can play MP3 and WAV format music
MIC: plug-in for wired microphone
OPERATING BLUETOOTH MODE
• After the power is turned ON, press the "MODE" button to enter into
Bluetooth mode. Check to see if "Bluetooth" appear on the display screen
to affirm you're on the right mode.
• Turn on your mobile device and put it in Bluetooth mode, search for the
device name "PABT6021" and confirm the connection when it appears
• Once the pairing is successfully, the speaker will emit beep tone
FM radio function
Includes remote control, wired mic
260W (PMPO) Output power
2400mAh battery
DC 5V Charging port
Frequency response 150Hz-18KHz
OPERATING AUX MODE
• Plug one end of the 3.5mm audio cable into the speaker's AUX jack, and
the other end to your mobile device (cellphone, laptop, tablet, etc)
• Control your music from the play/pause or forward/backward buttons on
the speaker panel or directly from the mobile device.
OPERATING LED FUNCTION
• Press and hold 'MODE' button to turn ON or OFF the LED display lights
OPERATING TWS FUNCTION
• Begin by using your mobile device to succcessfullly pair one of 2
bluetooth speakers on Bluetooth mode.
• When pairing is successfully, move onto the second speaker. Make sure
that speaker #2 is on bluetooth mode as well and double click the
"PLAY/PAUSE" button to turn on its TWS mode.
• If both speakers are close to each while pairing, they should quickly
connect together and begin to play your music simultaneously.
CHARGING
• Take the USB charging cable and plug it into the DC 5V charging port.
And charge it directly into a wall plug or into a computer USB port to
charge
• To make sure your speaker is being charged, look for the charging
indicator located on the right side of the LED screen. It will light up when
charging and will stop lighting up when the speaker is fully charged.
NOTE:
When speaker is not in use please turn off the device to conserve battery life.
Make sure to turn down the volume when you turn off the device so you can
maintain the speakers' (sub)woofer in good condition. This way you are less
like to burn out or damage the device.