INSTRUCTIONS
1. Identify the power conductors in the tips of the flood lamp.
2. Cut the power supply.
3. Use a 18 AWG (0.82 mm²) cable to connect the reflector in accord with your needs.
CONNECTION
Option A
Connect it directly to the outlet.
Option B
Using a power cord
Take the ends of the wires of the
reflector and install it on the on
the plug. The union should be firm
and totally isolated.
SPECIFICATIONS
Specifications may change without notice
Specifications may change without notice
Input: 120-220 V~ 50/60 Hz 650 mA max.
LED lamp power output: 50 W
Equivalent lighting power output: 1 500 W
Luminous efficiency: 100-110 lm / W
Consumption: 55 W/h
Stand-by power consumption: not applicable
Angle of beam: 120°
Temperature: 6 500 K
Life time: 50 000 h
LAM-850
Instruction manual
50 W OUTDOOR
FLOOD LAMP
V4.0 / 1217m
GROUND
LINE
NEUTRAL
GROUND
LINE
NEUTRAL
(Switch not included)
GROUND
LINE
NEUTRAL
IMPORTANT
Before to use the product, please read carefully this manual to avoid any malfunction. The
info in this manual is shown as reference. Due to updates can exist differences. Consult our
website www.steren.com to obtain the current version of this manual.
CAUTIONS
• The lamp installation only must be made by qualified personnel.
• Before to make the installation, cut the power supply.
• This appliance is not intended for use by persons (including children) whose physical, sensory
or mental capabilities are different or reduced, or lack experience or knowledge.
• Children should be supervised to ensure that they do not use the appliance as a toy.
• Any reparation not authorized may cause malfunction and avoid the warranty.
For indoor and outdoor use
WALL INSTALLATION
1. Select a solid and fixed surface to install the flood lamp.
2. Use the base of the lamp to make marks for drilling.
3. Drill the surface and install the lamp into the base.
4. Loosen the base screws using a wrench and adjust the angle.
Product: 50 W outdoor flood lamp
Part number: LAM-850
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from the
date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice, product box or package, and product, must be presented when warranty service is
required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer _______________________________________________________________
Address ________________________________________________________________________
Product _________________________________________________________________________
Brand __________________________________________________________________________
01 800 500 9000