Troubleshooting - Cata VI 15007 X Manual De Instrucciones

• Regularly check the door seals and wipe clean to ensure they are clean
and free from debris.
• Rinse and dry thoroughly.
Take care of not to damage the cooling system.
After cleaning, reconnect the equipmen to the mains supply.
CHANGING THE LIGHT BULB
Warning! If the LED lamp is faulty, DO NOT CHANGE IT YOURSELF.
If the LED lamp is changed by a person who is not qualified to do so, there is a
risk of injury and there could be serious malfunctions.
The LED lamp must be replaced by an expert in order to prevent any damage.
Speak Your local Service Force Centre.
PERIODS OF NON-OPERATION
When the appliance is not in use for long periods, take the following precau-
tions:
• disconnect the appliance from electricity supply.
• remove all items.
• clean the appliance and all accessories.
• leave the door open to prevent unpleasant smells.
The Wine cellar should be located in the coolest area of the room, away from
heat producing appliances, and out of the direct sunlight.
POWER FAILURE
Most power failures are corrected within a few hours and should not affect
the temperature of your appliance if you minimize the number of times the
door is opened. If the power is going to be off for a longer period of time, you
need to take the proper steps to protect your contents.

TROUBLESHOOTING

You can solve many common Wine cellar problems easily, saving you the cost
of a possible service call. Try the suggestions below to see if you can solve
the problem before calling the servicer.
PROBLEM POSSIBLE CAUSE
Wine cellar does Not plugger in.
not operate
The appliance is turned off.
The circuit breaker tripped or a blown
fuse.
SOLUTION
Please connect the appliance.
Please turn ON the appliance.
Turn on the circuit breaker or change
the fuse.