Installation - Ecler DACORD Serie Manual De Instrucciones

9. INSTALLATION

The best hanging method has been studied for each model of the DACORDi series. Each
one is provided with the optimal installation system. But if these assembly options are not suitable for
your needs DACORDi models also feature anchor nuts accepting M8 standard bolts. In addition all
206i and 208i models include a practical assembly assistance handle in their wiring board:
DACORD T108i
Ready for installation, using a mount compatible with the VESA 100 standard, either
vertically or horizontally on the wall or ceiling. Always check that the VESA mount chosen can
withstand the weight of the DACORD T108i speaker.
DACORD T208i
Provided with U-bracket for its installation on wall or ceiling. For its installation on ceiling
the use of ECLER SRDA accessory is recommended as it facilitates loudspeaker orientation.
It also features a 35mm standard pole mount receptacle to mount it on a standard 35mm
tripod (ECLER TRIP01) or mounting fixtures provided with a rod of this diameter (ECLER SR12).
DACORD H206i
Provided with U-bracket for its installation on wall or ceiling. For its installation on ceiling
the use of ECLER SRDA accessory is recommended as it facilitates loudspeaker orientation in
conjunction with U-bracket. ECLER SR10 mounting fixture can also be used for wall mounting and
allows the loudspeaker to be oriented in any direction.
DACORD H208i
Provided with U-bracket for its installation on wall or ceiling. For its installation on ceiling
the use of ECLER SRDA accessory is recommended as it facilitates loudspeaker orientation in
conjunction with U-bracket.
IMPORTANT NOTE
In no case should these equipments be suspended via their carrying handles; use the
accessories adapted to each application. Whenever loudspeakers are wall or ceiling mounted, a
redundant mounting system is obligatory as safety measure. Use a steel cable or chain of suitable
gauge to avoid the fall of the loudspeaker in case some element of the main suspension system
would break away from its fastening device.
7