Use Tf-Card; Connected To The Computer - Nevir NVR-TAB7D S5 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Press
, then it will popping "Input Method" switch interface, as shown below:
Select the input method you want here.
[Noted] After newly install input method, you should "Settings>Language & input>KEYBOARD & INPUT
METHODS", then you can use.
1.2.7 Use T-Flash Card
Insert T-FLASH card (Card not included)
Insert the T-Flash card into the slot in direction of the device's bottom shell until you hear a sound of click.
Browse files in the memory card
In this MID device,you can view and use the needed files in catalogue of "MENU">"File manager"> "SD
Card".
1) Remove T-Flash card
Close all open files from the T-Flash, then enter into "MANU>"SETTINGS">"TF card and & device storage",
click "Unmount SD card", System will prompt that TF card was removed safely. Tap with your fingertips to the
pop-up T-Flash Card.
[Note] Do not insert the T-FLASH card by force; this card can only be applied in one direction
2) Do not remove the TF card before Unmounted it, or the card may be damaged.
3) If the memory card is write-protected, data will not be formatted and written, please remove the write
protection before such operations.
4) Major brands memory card is recommended to avoid the card is not compatible to this device.
1.2.8

Connected to the Computer

One end the data line connect to the computer, the other end connect the USB port of the device, select
22

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido